Basic Scan Jobs - Default; Advised Settings For Scan Jobs - Oce PlotWave 340 User Manual

Advised settings for scan jobs

Basic Scan Jobs - Default

Advised settings for scan jobs
Introduction
A default scan job takes three steps: feed the original face up, select the location in the
scan Smart Access, and tap the green button.
When you change the presets or the advanced settings it is called an extended scan job.
Advised settings for scan to greyscale or black and white file
It is best to predefine the advised settings for scan jobs you do most often.
In the table below you find the advised settings for specific scan-to-file jobs. In most
cases, the advised settings give the best results.
#
Original document
Monochrome CAD
Drawings
Folded coloured CAD
drawing
Coloured original, like
CAD-colour, maps, busi-
ness graphics, etc.
CAD drawings with marks
from marker pens
Photos and high definition
colour prints
Medium quality colour
prints
248 Chapter 4 - Use the Printing System
Original type
'Lines/text standard' or
'Folded lines/text'
'Coloured original'
'Coloured original'
'Coloured original'
'Photo'
'Coloured original' or
'Photo'
Remarks
For folded monochrome
originals apply 'Folded
lines/text'.
The 'Coloured original'
mode converts all colours,
even weak ones, to
greyscale.
'Photo' gives a softer con-
trast than 'Coloured origi-
nal'.
For photos and colour
prints scan to greyscale is
preferred over scan to
black and white.