Radio Certifications; Fcc Certification, 900Mhz - Banner SureCross DX80 Product Manual

12 Radio Certifications

Banner's SureCross product line is certified by the FCC, European Union, and many other countries for operation within
specific radio frequencies.

12.1 FCC Certification, 900MHz

The DX80 Module complies with Part 15 of the FCC rules and regulations.
FCC ID: TGUDX80 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
12.1 FCC Notices
IMPORTANT: The DX80 Modules have been certified by the FCC for use with other products without any further certifica-
tion (as per FCC section 2.1091). Changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate the equipment.
IMPORTANT: The DX80 Modules have been certified for fixed base station and mobile applications. If modules will be used
for portable applications, the device must undergo SAR testing.
IMPORTANT: If integrated into another product, the FCC ID label must be visible through a window on the final device or it
must be visible when an access panel, door, or cover is easily removed. If not, a second label must be placed on the out-
side of the final device that contains the following text: Contains FCC ID: TGUDX80.
12.1 Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the in-
terference by one or more of the following measures:
• Reorient or relocate the receiving antenna,
• Increase the separation between the equipment and receiving module,
• Connect the equipment into an outlet on a circuit different from that to which the receiving module is connected,
and/or
• Consult the dealer or an experienced radio/TV technician for help.
Antenna Warning WARNING: This device has been tested with Reverse Polarity SMA connectors with the antennas listed in
Table 1 Appendix A. When integrated into OEM products, fixed antennas require installation preventing end-users from re-
placing them with non-approved antennas. Antennas not listed in the tables must be tested to comply with FCC Section
15.203 (unique antenna connectors) and Section 15.247 (emissions).
12.1 FCC Approved Antennas
WARNING: This equipment is approved only for mobile and base station transmitting devices. Antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colloca-
ted or operating in conjunction with any other antenna or transmitter.
DX80 Module may be used only with Approved Antennas that have been tested with this module.
Model Number
BWA-9O1-x
100
SureCross DX80 and Performance DX80 Product Manual
Antenna Type
Integral antenna
Omni, 1/4 wave dipole
www.bannerengineering.com - tel: 763-544-3164
Maximum Gain
Unity gain
≤2 dBi
Rev. J