Replacement Filters; Surge Suppressors; Cables; Antenna Cables - Banner SureCross DX80 Product Manual

SureCross DX80 and Performance DX80 Product Manual

11.4.2 Replacement Filters

Model Number

11.5 Surge Suppressors

11.6 Cables

11.6.1 Antenna Cables

Use these cables to connect a Gateway or Node to a bulkhead surge suppressor or a bulkhead surge sup-
pressor to an RP-SMA antenna. These cables are typically used inside an enclosure or without an enclosure.
Use these cables to connect a Gateway and Node to an N-type antenna, N-type antenna extension cable, or
N-type surge suppressor. These cables may be used inside or outside the enclosure or without an enclosure.
Rev. J
Description
FTH-FIL-001 Aluminum grill filter cap (factory default, ships with M12FT*Q sensors)
FTH-FIL-002 Stainless steel, sintered to 10 micrometer porosity (for high dust environ-
ments.)
Part No. Model No.
79296 BWC-LMRSFRPB
12477 BWC-LFNBMN-DC
Part No. Model No.
78544 BWC-1MRSFRSB0.2
78337 BWC-1MRSFRSB1
78338 BWC-1MRSFRSB2
77488 BWC-1MRSFRSB4
Part No. Model No.
77486 BWC-1MRSMN05
77820 BWC-1MRSMN2
www.bannerengineering.com - tel: 763-544-3164
Description
Surge Suppressor, bulkhead, RP-SMA Type
Surge Suppressor, bulkhead, N-Type, dc Blocking
Description
RG58, RP-SMA to RP-SMAF Bulkhead, 0.2M
RG58, RP-SMA to RP-SMAF Bulkhead, 1M
RG58, RP-SMA to RP-SMAF Bulkhead, 2M
RG58, RP-SMA to RP-SMAF Bulkhead, 4M
Description
LMR100 RP-SMA to N Male, 0.5M
LMR100 RP-SMA to N Male, 2M
91