Ethernet Cables; Adapter Cables; Splitter Cables - Banner SureCross DX80 Product Manual

These cables are antenna extension cables, connecting an N-type antenna to another N-type antenna cable.
These cables are usually used outside the enclosure.

11.6.2 Ethernet Cables

Use a crossover cable to connect the DX80 GatewayPro or DX83 Ethernet Bridge to a host system without using an Ether-
net switchbox or hub. When using a switchbox or hub, use a straight cable.
Part No. Model No.
77669 BWA-E2M
78469 BWA-E8M
78467 BWA-EX2M

11.6.3 Adapter Cables

Part No. Model No.
81325 BWA-HW-006
19970 BWA-UCT-900
(shown)

11.6.4 Splitter Cables

Part No.
92
Part No. Model No.
77489 BWC-4MNFN3
77490 BWC-4MNFN6
77821 BWC-4MNFN15
77822 BWC-4MNFN30
Description
Ethernet cable, RSCD RJ45 440, 2M
Ethernet cable, RSCD RJ45 440, 8M
Ethernet cable, crossover, RSCD RJ45CR 440, 2M
Description
Adapter cable, USB to RS-485, for use with the User Configuration Tool soft-
ware (UCT)
Adapter cable with power, USB to RS-485, for use with the User Configuration
Tool software (UCT), supplies power to 1 Watt radios
Model No.
83265 CSRB-
M1250M125.47M125.73
www.bannerengineering.com - tel: 763-544-3164
SureCross DX80 and Performance DX80 Product Manual
Description
LMR400 N Male to N Female, 3M
LMR400 N Male to N Female, 6M
LMR400 N Male to N Female, 15M
LMR400 N Male to N Female, 30M
Description
Splitter cable, 5-pin Euro-style QD, No trunk male, two
female branches, black (shown).
Use to split power between two FlexPower or solar
powered devices. DO NOT use this cable to connect a
FlexPower devices to a 10–30V dc powered device.
Rev. J