Radio Certifications; Fcc Certification, 900Mhz - Banner Sure Cross Performance DX80 Instruction Manual

®
Sure Cross Performance DX80 Wireless I/O Networks

12 Radio Certifications

Banner's SureCross product line is certified by the FCC, European Union, and many other countries for operation within
specific radio frequencies.

12.1 FCC Certification, 900MHz

The DX80 Module complies with Part 15 of the FCC rules and regulations.
FCC ID: TGUDX80 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
12.1 FCC Notices
IMPORTANT: The DX80 Modules have been certified by the FCC for use with other products without any further
certification (as per FCC section 2.1091). Changes or modifications not expressly approved by the manufacturer could void
the user's authority to operate the equipment.
IMPORTANT: The DX80 Modules have been certified for fixed base station and mobile applications. If modules will be used
for portable applications, the device must undergo SAR testing.
IMPORTANT: If integrated into another product, the FCC ID label must be visible through a window on the final device or it
must be visible when an access panel, door, or cover is easily removed. If not, a second label must be placed on the
outside of the final device that contains the following text: Contains FCC ID: TGUDX80.
12.1 Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna,
• Increase the separation between the equipment and receiving module,
• Connect the equipment into an outlet on a circuit different from that to which the receiving module is connected,
and/or
• Consult the dealer or an experienced radio/TV technician for help.
Antenna Warning WARNING: This device has been tested with Reverse Polarity SMA connectors with the antennas listed in
Table 1 Appendix A. When integrated into OEM products, fixed antennas require installation preventing end-users from
replacing them with non-approved antennas. Antennas not listed in the tables must be tested to comply with FCC Section
15.203 (unique antenna connectors) and Section 15.247 (emissions).
12.1 FCC Approved Antennas
WARNING: This equipment is approved only for mobile and base station transmitting devices. Antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be
collocated or operating in conjunction with any other antenna or transmitter.
DX80 Module may be used only with Approved Antennas that have been tested with this module.
Model Number
BWA-9O1-x
BWA-9O2-C
BWA-9O6-A
BWA-9O5-B
BWA-9Y10-A
Table 1. Type certified antennas
98
All manuals and user guides at all-guides.com
Antenna Type
Integral antenna
Omni, 1/4 wave dipole
Omni, 1/2 wave dipole, Swivel
Omni Wideband, Fiberglass Radome
Omni Base Whip
Yagi
www.bannerengineering.com - Tel: 763.544.3164
Maximum Gain
Unity gain
≤2 dBi
≤2 dBi
≤8.2 dBi
≤7.2 dBi
≤10 dBi