Basic Das Connection - Promise Technology VTRAK J300s Quick Start Manual

Each I/O module has two table-routed external receptacles (CN1 and CN2) and
one subtractive-routed external receptacle (CN3).

Basic DAS Connection

PC
Figure 8. An example of a basic DAS connection between one Host PC
and one VTrak J300s unit
The arrangement above is the minimum DAS system with a single SAS HBA
card in the Host PC. Connect the SAS card to the table-routed port (CN1) on the
I/O module.
Use a SFF-8470 4X to 4X external SAS cable with thumbscrew connectors
(supplied with the J300s unit).
Because the Host SAS HBA card is an end device, you can connect it to any of
the three SAS ports (CN1, CN2 or CN3) on the J300s unit's I/O module.
SAS HBA cards and cables are User-supplied items. They are not
included with the VTrak unit.
Subtractive-Routed Port
Step 4: Set Up Data Cable Connections
Note
O
I
SFF-8470 external
4X to 4X SAS cable
SAS HBA Card
7
O
I
VTrak J300s