Removing And Installing The Rewind Guide Plate, Dispense Plate Or Tear-Off Plate - CAB SQUIX Operator's Manual

4 Loading Material
20
4.4

Removing and Installing the Rewind Guide Plate, Dispense Plate or Tear-off Plate

To convert the printer for use in another operating mode, a rewind guide plate (2a), a dispense plate (2b)
or a tear-off plate (2c) may need to be installed.
Figure 19
Removing a plate
 Loosen screw (3) several turns.
 Slide plate (2) upwards and remove it.
Installing a plate
 Place plate (2) onto the screw (3) and slide it downwards behind the pins (1).
 Tighten screw (3).
1 2 3
Removing and installing the rewind guide plate, dispense plate or tear-off plate
1
2a
2b
2c
20