Unpacking And Setting-Up The Printer - CAB Eos Operator's Manual

10 2 Installation
10 11
17 16
Fig. 5

2.2 Unpacking and Setting-up the Printer

 Lift the label printer out of the box and set it up on a level surface.
 Check label printer for damage which may have occurred during transport.
 Check delivery for completeness.
Contents of Delivery:
• Label Printer
• Power Cable Type E+F
• Cardboard Core
• Operator's Manual
• DVD with label software, Windows driver and documentation
• USB Cable
• depending on the type of printer, tear-off plate (mounted) or cutter
 depending on the type of printer, mount cutter  2.3 on page 11.
Notice!
i
Please keep the original packaging in case the printer must be
returned.
i
Notice!
When transporting the printer remove the transfer ribbon and media.
!
Attention!
The device and printing materials will be damaged by moisture and
wetness.
 Set up label printers only in dry locations protected from splash
water.
15
Print Mechanics
10 Label sensor
11 Printhead retainer with
printhead
12 Guides
12
13 Knob for adjusting the guides
14 Knob for adjusting the label
sensor
15 Lever for locking the
printhead
13
16 Tear-off plate
17 Print roller
14
11 10