GE NX-4-EUR Installation Manual page 15

[*]-[9]-[4] SET KEYPAD NUMBER AND PARTITION
1.
2.
3.
4.
[*]-[9]-[5] SET ELAPSED INCREMENTS (HOURS/DAYS) SINCE LAST AUTOTEST
1.
2.
[*]-[9]-[6] SET SYSTEM DATE
1.
2.
3.
[*]-[9]-[7] SET SYSTEM CLOCK
1.
2.
Note: the clock is a 24-hour clock.
[*]-[9]-[8] INITIATE CALLBACK
Pressing [*]-[9]-[8] while the system is disarmed will cause the control panel to perform a
callback for a download.
NOTE: A VALID USER CODE MAY BE REQUIRED AFTER [*]-[9]-[8], IF ENABLED IN LOCATION
41.
[*]-[9]-[9] ANSWER DOWNLOAD
Pressing [*]-[9]-[9] while the system is disarmed will cause the control panel to seize the phone
line for a download.
NOTE: A VALID USER CODE MAY BE REQUIRED AFTER [*]-[9]-[9], IF ENABLED IN LOCATION
41.
NX-4-EUR Installation manual
Enter [*]-[9]-[4]-[program code]- the "Service" LED and the "Instant" LED will flash.
Enter the keypad number (1-8).
Press [*]- the "Instant" LED will illuminate steadily, and the "Service" LED will carry on
flashing.
Enter the partition number for the keypad. The keypad will automatically exit this mode
now).
Enter [*]-[9]-[5]-[program code]- the "Service" LED will flash.
Enter [100's digit] -[10's digit]-[1's digit]-[#].
Enter [*]-[9]-[6]- the "Service" LED will flash.
Enter [master code]-[day of week (1=Sun)]-[month 10's digit]-[month 1's digit]-[day 10's
digit].
[day 1's digit]-[year 10's digit]-[year 1's digit].
Enter [*]-[9]-[7]- the "Service" LED will flash.
Enter [master code]-[hour 10's digit]-[hour 1's digit]-[minutes 10's digit]-[minutes 1's
digit].
Page 15 02/07/06