DL8000 Preset Instruction Manual
E.2.8 Transaction End Prompt
E.2.9 Conditional String Display for Temperature Correction String
E-10
If the operator selects at least one end transaction prompt, this
screen displays during the transaction end sequence (n indicates the
end transaction prompt).
: If you defined multiple transaction prompts, the DL8000
Note
displays all defined end transaction prompts in sequence.
11/23/09 13:58:59
Trans end prompt
When no net volumes appear on the loading screen (either by the
loading method or in the dynamic data), the "Volume corrected to
-------->xx°C/°F" message does not display. This message should
display under any of the following conditions:
If the Preset Delivery Type parameter [63,0,29] is set to 3, Standard
to Volume (see Table E-5 for more information)
If the Type of Display Quantity parameter [63,0,30] is set to 1, Net
Standard Volume (see Table E-5 for more information).
If any of the totalizers configured on the dynamic data displays
([62,0,32] to [62,0,47]) is a net totalizer (see Table E-4).
DL8000 Keypad Display
Recipe #1
#n
(ENTER to continue)
Revised February-2016