Replacing The Display - Cornelius pbd175 Service Manual

PBD175 (Spire 3.0) Service Manual
4. Pivot the side cladding away from the unit and slide back slightly to remove from rear tab and remove
from the unit.
5. To replace the cladding, reverse the procedure.
R D
EPLACING THE
To replace the touch screen display, perform the procedure below.
1. Shut down the unit using the service menu on the
display.
2. Unplug the power cord from the wall receptacle.
3. Open the door.
4. Loosen the four mounting screws holding the rear
door panel to the door frame and lift the panel up
and off the mounting screws.
5. Unplug the power, USB and HDMI cables from the
rear of the touch screen panel.
Publication Number: 620062609SER
ISPLAY
Figure 35.
Power
HDMI
Connector
Connector
Figure 36.
- 24 -
USB
Connector
© 2015-2016, Cornelius Inc.