Hdd Setting - xmartO WNV14 User Manual

Wireless NVR System User Manual
Operation Instructions:
Title
OSD Transparency
VGA resolution
Auto Switch
Tips:
 Skip video loss means system will skip channels that do not display videos during auto switch.
 Choose x1 view or x4 view to set how many channels be displayed at a time during auto switch, 1
means display only one channel at a time, and 4 means display 4 channels at a time.
 VGA resolution should match with your screen resolution. Default NVR resolution is 1280 x 1024.
If your NVR outputs different resolution that your screen takes, you may not get display on the
screen. If in this case, please connect the NVR to a higher or lower resolution screen and set it to
the correct resolution and then connect back to your primary screen.

4.10.4 HDD Setting

Function: Allows users to check hard drive information and format hard drive.
Operation Steps:
1. Right click the mouse to pop out NVR main menu, then click System setting – General setting –
HDD setting, you'll see below interface, as shown in image 55.
Description
Set the transparency of your system OSD
Change the NVR resolution to match with different screens
Enable to turn on auto switch of channels
Image 55
50