Time-Scheduled Recording - xmartO WNV14 User Manual

Wireless NVR System User Manual
1) Right click the NVR mouse to pop out NVR main menu, choose "Manual record".
2) Select the channels you want to record.
3) If you want all the channels to record, then check "All" or click "All ON".
4) If you want to disable manual record for all channels, click "All OFF".
5) Click "OK" to finish the manual record setup. As shown in image 41.
Tips:
 Recording Priority: Alarm Recording > Motion Detection Recording > Manual Recording > Time
Scheduled Recording

4.6.2 Time-scheduled Recording.

Function: Time scheduled recording enables the NVR to record 24/7 continuously or record in
specified time periods only.
Operation Steps:
1) Right click mouse to pop out NVR main menu, then click System setting – Record setting – Record
Plan. You'll see below interface, as shown in image 42.
2) Choose the Channel and set Weekday from drop-down list.
Image 41
Image 42
38