Ptz Setting; Ptz Parameter Setting - xmartO WNV14 User Manual

Wireless NVR System User Manual
Tips:
 Change the hotspot name or the password will cause losing connection with cameras; please
restore to factory settings if you lose camera connections; or follow 4.3.2 to add cameras to the
NVR.
 If you plan to install two systems in the same room, you can try to change the WiFi chancel to
avoid interference.

4.5 PTZ Setting

4.5.1 PTZ Parameter Setting

Prerequisites:
Before trying to control the speed dome or PTZ, you need to make sure that the decoder of this PTZ
has already connected to NVR, and you need to set the parameters for the PTZ in NVR.
Operation Steps:
1) Right click the mouse to pop out NVR main menu, then click System setting – CH Setting – PTZ
setting, you'll see below interface, as shown in image 39.
Image 38
35