Pppoe - xmartO WNV14 User Manual

Wireless NVR System User Manual

4.4.5 PPPoE

Function: Supports access internet via dial-up
Operation Steps:
1) Right click the mouse to pop out NVR main menu, then click System setting – Network setting –
PPPoE, you'll see below interface, as shown in image 36.
2) Check "Enable", enter the Username and Password provided by ISP.
3) Click "Apply" to save the settings, and click "OK" to exit.
Tips:
 PPPoE Function:
PPPoE
4.4.6 3G
Function: This is to enable users who don't have Internet service to use USB data stick to connect the
NVR to Internet.
Operation Steps:
1) Right click the mouse to pop out NVR main menu, then click System setting – Network setting –
3G, you'll see below interface, as shown in image 37.
Image 36
for enable PPPoE, allowing access internet via dail-up;
33
for disable