Ftp - xmartO WNV14 User Manual

Wireless NVR System User Manual
Operation Steps:
1) Right click the mouse to pop out NVR main menu, then click System setting – Network setting –
DDNS, you'll then see below interface, as shown in image 32.
2) Check "Enable" to enable DDNS function.
3) Enter the Domain Name, Username and Password. Click "Test" to test your settings.
4) Click "Apply" to save the settings, and click "OK" to exit.
Tips:
 Currently supports domain providers: popdvr, 3322, changeip, no-ip, dyndns. Please apply for
your own DDNS from these providers before you use it.
 Domain Name information cannot be edited if "Enable" is unchecked.

4.4.3 FTP

Function: Set up uploading motion detection snapshots & videos to FTP.
Operation Steps:
1) Right click the mouse to pop out NVR main menu, then click System setting – Network setting –
FTP, you'll see below interface, as shown in image 33.
Image 32
30