Ipc Maintenance - xmartO WNV14 User Manual

Wireless NVR System User Manual
Factory setting, you'll see below interface, as shown in image 67.
Image 67
2. Check the options you want to restore to factory default and click "Apply".
5. Click "OK" when confirmation message pops out. Your NVR settings will be restored to factory
default.

4.11.8 IPC Maintenance

Function: Allows users to upgrade cameras firmware.
Operation Steps:
1. Right click your mouse, then click System setting – System Admin – IPC maintenance, you'll see
below interface, as shown in image 68.
59