Alarm-Triggered Recording (Sensor Recording) - xmartO WNV14 User Manual

Wireless NVR System User Manual
Tips:
 If you want to set motion detection recording for other channels, repeat above steps, or click
"Copy to All".
 There are four motion alarm types:
Alarm: Check Alarm, you'll see the prompt error message on monitor when motion is detected.
Buzzer: Check Buzzer, the NVR will buzz when motion is detected.
Email Notification: Check Email Notification, you'll receive email alerts with snapshots when
motion is detected.
APP Notification: Check APP Notification, you'll receive mobile push notifications when motion is
detected.
 For more information about "Area Edit" setting, check here:
http://www.xmarto.com/helpcenter/?/article/5

4.6.4 Alarm-triggered Recording (Sensor Recording)

Function: Alarm-triggered recording allows the NVR to start recording when any alarm/sensor input
is detected. It works only when NVR is connected with external alarms and sensors.
Operation Steps:
1) Right click mouse to pop out NVR main menu, then click System setting – Record setting – Record
Plan.
2) Set the Channel and Weekday from drop-down menu. Keep the default schedule 1 time period
and check "Sensor".
3) Go to "Sensor setup", as shown in image 46, select the channel you want to set as
Alarm-triggered Recording from "Channel" drop-down menu, set work Mode as "Enable".
Image 46
41