System Maintenance; Factory Setting - xmartO WNV14 User Manual

Wireless NVR System User Manual
Tips:
 Please use an USB thumb disk to upgrade firmware, USB drive may not be recognized by the NVR.
And the USB thumb disk needs to be formatted to Fat32 format.
 Make sure that the upgrade firmware file is put in the root directory of your USB flash disk, not in
any folder.
 There are four types of software upgrade, including System, Logo, Resource, and Wireless
Module.
 DO NOT unplug the system from power during upgrade, or else system will be damaged.

4.11.6 System Maintenance

Function: Allows uses to set the time of NVR auto maintenance.
Operation Steps:
1. Right click your mouse, then click System setting – System Admin – System maintenance, you'll
see below interface, as shown in image 66.
2. Schedule the system auto maintenance.

4.11.7 Factory Setting

Function: Reset NVR settings to factory default.
Operation Steps:
1. Right click your mouse to pop out NVR main menu, then click System setting – System Admin –
Image 66
58