Wifi Setting - xmartO WNV14 User Manual

Wireless NVR System User Manual
Image 37
2) Check "Enable" to enable 3G Module.
3) Enter the information of Dial-Number, APN, PIN, Username, Password, and etc.
4) Click "Apply" to save settings, and click "OK" to exit.

4.4.7 WiFi Setting

Function: This enables users to change settings of the NVR's Wi-Fi hotspot and password; and some
other router related settings.
ESSID: The default Wi-Fi hotspot name of the NVR.
Password: The default password of the Wi-Fi hotspot; auto generated by the system.
Operation Steps:
1) Right click the mouse to pop out NVR main menu, then click System setting – Network setting –
WiFi setting, you'll see below interface, as shown in image 38.
34