Time Setting - xmartO WNV14 User Manual

Wireless NVR System User Manual
Detailed Operation Explanations:
Operation Object
Auto Logout
Keyboard Sound
Language
KeyPad Type
Remote Control ID
Setup Guide
Show Device ID on Screen
Show Time on Screen

4.10.2 Time Setting

Function: Set Time Zone, System Date and System Time.
Operation Steps: Right click the mouse to pop out NVR main menu, then click System setting -
General setting - Time setting. You'll see below interface, as shown in image 53.
Time Zone: Set your local time zone from drop-down list.
Date format: Choose your system's date display format.
System Date: Set your system's date.
System Time: Set your system's time.
Sync Time: Check "Enable", system will synchronize with your local date and time; uncheck "Enable",
Image 52
Explanation
Enable/disable the auto logout of system
Enable/disable the keyboard sound
Change the system language
Choose the Keyboard type
Enable/disable remote control of the system with IR Remote Controller
Enable/disable Setup Guide of your system
Enable to display your NVR's Device ID on screen, Position allows you to
change the place of where to display the Device ID.
Enable to display your NVR's time on screen, Position allows you to
change the place of where to display the NVR time
48