Ptz Control Operations - xmartO WNV14 User Manual

Wireless NVR System User Manual
Operation Guide as below:
Operation Target
Channel
Protocol
Device Address
Baud Rate
Copy to

4.5.2 PTZ Control Operations

Operation Steps:
1) Double click the channel you want to set in main preview screen.
2) Right click mouse in that channel's preview interface and choose the PTZ control, you'll then see
below image, as shown in image 40.
Operation Explanation：
: Control the PTZ to rotate upward
: Control the PTZ to rotate downward
: Control the PTZ to rotate leftward
: Control the PTZ to rotate rightward
Function Description
Choose the channel you want to set PTZ
Choose the correct protocol of this PTZ
Enter the specified decoder address
Choose the right baud rate to match with this PTZ's baud rate
Choose the channel you want to copy the settings and click "Copy to" to apply
current channel's settings to other channels
Image 39
36