Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for xmartO WOS1388
Summary of Contents for xmartO WOS1388
-
Page 1: User Manual
Wireless NVR System User Manual User Manual xmartO Wireless NVR System Ver. 1.4... -
Page 2: Content Preface
Thank you for purchasing xmartO products! This user manual is to introduce the operations of xmartO wireless camera systems in more details. If there is any other question which is not covered in this user manual, please contact xmartO support. -
Page 3: Table Of Contents
Wireless NVR System User Manual Content Preface……………………………………………………………………………………………………………………………………………….1 CONTENT……………………………………………………………………………………………………………………………………………2 Product features overview……………………………………………………………………………………………………………4 Product introduction………………………………………………………………………………………………………………4 Product Specifications…………………………………………………………………………………………………………….4 Product Key Features……………………………………………………………………………………………………………...5 Operating instructions………………………………………………………………………………………………………………….6 Front panel………………………………………………………………………………………………………………………..…..6 Rear panel………………………………………………………………………………………………………………………………6 Mouse operation…………………………………………………………………………………………………………………...7 Input method…………………………………………………………………………………………………………………………7 User Interface…………………………………………………………………………………………………………………………8 2.5.1 User Interface element…………………………………………………………………………………………………..8 2.5.2 Frequently-used buttons……………………………………………………………………………………………..…8 Menu Introduction……………………………………………………………………………………………………………….…8 Installation and connection…………………………………………………………………………………………………….…….8 Installation precautions………………………………………………………………………………………………….….…..8 Install hard drive……………………………………………………………………………………………………………………..9 Preparations before installation………………………………………………………………………………………………9... - Page 4 Access from remote PC……………………………………………………………………………………………….……..…50 5.3.1 Login e-seenet with device ID…………………………………………………………………….……………..…50 5.3.2 Login with user ID………………………………………………………………………………………………………..52 Access from smartphone………………………………………………………………………………………………………………52 Appendix………………………………………………………………………………………………………………………………….…..55 Hard drive capacity calculation……………………………………………………………………………………………….55 Recording capacity calculation………………………………………………………………………………………………..55 Tips: If you don’t find your answer here, please logon http://www.xmarto.com/support/ for FAQ; or contact support@xmarto.com...
-
Page 5: Product Features Overview
1. Product features overview 1.1 Product introduction The xmartO WNO series network video recorder is our new generation of NVR. It supports wireless WiFi network video input, real time live view, video codec and video playback. The NVR system can be widely used for surveillance of home, business, office and villa. -
Page 6: Product Key Features
Wireless NVR System User Manual Camera 1.3 Product Key Features • H.264, 720p/ 960p/ 1080p wireless network video recorder • Built-in high-performance high-stability Wi-Fi router module; 720p & 960p NVRs support 802.11b/g/n protocol, 1080p NVRs support 802.11a/n protocol. • Add Wi-Fi IP network camera to NVR by auto match-code. •... -
Page 7: Operating Instructions
Wireless NVR System User Manual 2. Operation Instructions 2.1 Front Panel Image 1 1． POWER：Power Indicator 2． HDD：Hard Drive Indicator 3． Operation Indicator – When IPC is connected to the NVR, this indicator will blink green 2.2 Rear Panel Image 2 1. -
Page 8: Mouse Operation
Wireless NVR System User Manual 4. DC12V: Power Input 5. WAN: Connect your NVR to router for Internet connection 6. LAN1 – LAN3: IPC video inputs (only when necessary) 7. Wi-Fi Antenna connectors 2.3 Mouse Operations Button Operation Effect Example Left button Single click Choose object... -
Page 9: User Interface
Wireless NVR System User Manual 2.5 User Interface Introduction 2.5.1 User Interface Element Description Name Operation Effect Example Button Left click mouse Save or cancel Apply, confirm, cancel Open sub interface Edit, setting Edit box Left click mouse Edit Edit password Drop-down box Left click mouse Select... -
Page 10: Install Hard Drive
Wireless NVR System User Manual 1. To extend the life of the device, please keep the device away from water, high temperature, and dust. Use it in a well-ventilated place. 2. Please use SATA hard drive, USB devices and mouse purchased from authentic channels. 3. -
Page 11: Camera Mounting Spots
Wireless NVR System User Manual 2. Test the system before installation. Connect the NVR to a monitor/ TV via VGA or HDMI, connect it to power with included power adapter (bigger one is for NVR); mount antennas for cameras, connect cameras to power. -
Page 12: Operation System Introduction
Wireless NVR System User Manual 4. Operation system introduction 4.1 Starting up/ log in/ log out/ restart 4.1.1 Starting up Note: · Please ensure the input voltage fit the NVR’s requirements and the NVR has correct ground connection. · Unstable power source may cause unstable working status or even damage the NVR. If you have unstable power source in your area, please use voltage-stabilized power source. -
Page 13: Login
Wireless NVR System User Manual 4.1.2 Log in After system initialized, the system will pop out below login interface. Users must log in to do further operations. Figure 8 Operation Steps: 1. Left click mouse in the user name edit box to type in user ID and password. Default user ID is admin. -
Page 14: System Restart
Wireless NVR System User Manual 4.1.4 System Restart If you want to restart the system while using it, you can right click the mouse to get drop-down menu, click “Exit System” and select “System reboot”. 4.2 Setup Wizard When you succeed login the system, it will automatically enter Setup Wizard to guide users to do basic settings. - Page 15 Wireless NVR System User Manual including Time, Motion and Alarm. The color bars display record periods and modes intuitively. After the settings, click “Next” to enter next settings. Image 12 2. Network settings (Image 13): You can choose to enable DHCP so the NVR gets IP automatically, or allocate IP, gateway, and subnet mask, DNS etc.
-
Page 16: Video Management
Wireless NVR System User Manual Image 14 4. Setup Wizard (Image 15): If you don’t want to go through these settings when the system restarted, please unselect the setup wizard and complete the settings. Image 15 4.3 Video Management 4.3.1 Search Device Function Description: Find all IP cameras in the same network segment. -
Page 17: Add Device
Wireless NVR System User Manual Image 16 4.3.2 Add Device Function Description: Add IP cameras in the search results list to your NVR. Operation Steps: 1. Match Code Statement: The main purpose of “Match Code” is to match the IP Cameras to NVR, transmit the NVR’s WiFi hotpot and password to IP Cameras, so that the IP cameras automatically connect to NVR and transmit the video signals to NVR wirelessly. - Page 18 Wireless NVR System User Manual 2. If you want to change camera of a certain channel, select and delete that channel in the NVR channel list, match code the right camera to the channel you want. Image 17 Image 18 3.
-
Page 19: Delete Device
Wireless NVR System User Manual 4.3.3 Delete Device Function Description: Delete devices from the NVR Operation Steps: 1. Right click mouse in your system, choose “IPC Add” from the drop-down menu to enter Video Manage interface. 2. Select any of the IP Cameras that’s already added to NVR and click “Delete Channel” to delete this IP Camera from NVR (As shown in Image 19). -
Page 20: Stream Setting
Wireless NVR System User Manual Figure 20 4.3.5 Stream Setting Function Description: Set the IP Camera information, including stream, resolution, rate, frame rate, frame rate interval, H.264 coding grade, and etc. Operation Steps: 1. Right click mouse in your system, choose “IPC Add” from the drop-down menu to enter Video Manage interface. -
Page 21: Network Setting
Wireless NVR System User Manual 4.4 Network Setting 4.4.1 Network Setup Declaration: If the system is used for remote surveillance, you must set up the network to ensure it work properly. Default IP address: 192.168.1.114 Operation Steps: 1. Right click mouse in your system, choose “System setup” from the drop-down menu, click “Network setup”, you’ll see below interface, as shown in Image 22. -
Page 22: Dynamic Domain Name Server (Ddns)
Wireless NVR System User Manual 4.4.2. DDNS Function Description: If you don’t have a static IP, using DDNS (Dynamic DNS) to access your device via domain name can effectively solve the problem caused by dynamic IP. Tips: this is only necessary when you are not satisfied with the Cloud DEVICE ID method. DDNS does not rely on Cloud streaming so it may give you smoother remote connection. -
Page 23: Email
Wireless NVR System User Manual see below interface, as shown in Image 24. Image 24 2. Select “Enable” to enable FTP 3. Enter the FTP Server, Port, Username and Password. 4. Set “Schedule” and click “Test” to check if it is set successfully, if yes, click “Apply” to save the settings. -
Page 24: Pppoe
If failed to set the email alert, please assure that you’ve enabled SMTP service for your email account. Please refer to http://www.xmarto.com/support/ for a more detailed email setting guide. 4.4.5 PPPoE Function Description: Supports access internet via dial-up... - Page 25 Wireless NVR System User Manual Operation Steps: 1. Right click mouse in your system, enter “System setup” – “Network setup” – “PPPoE”, you’ll then see below interface, as shown in Image 26. Figure 26 2. Select “Enable”, enter the Username and Password provided by ISP. Tips: ...
-
Page 26: Wireless (Wi-Fi) Settings
Wireless NVR System User Manual Image 27 1. Select “Enable” to enable 3G Module. 2. Enter the information of Dial-Number, APN, PIN, Username, Password, and etc. 3. Click “Apply” to save settings. 4.4.7 Wireless Function description: This enables users to change settings of the NVR’s Wi-Fi hotspot and password; and some other router related settings. -
Page 27: Pan & Tilt Setting
Wireless NVR System User Manual 4.5 PTZ Control (xmartO WOS series do not support PTZ now) 4.5.1 PTZ Parameter Setting Prerequisites: Before trying to control the speed dome or PTZ, you need to make sure that the decoder of this PTZ has already connected to NVR, and also you need to set the parameters for the PTZ in NVR. - Page 28 Wireless NVR System User Manual Image 29 Operation Explanation： : Control the PTZ to rotate upward : Control the PTZ to rotate downward : Control the PTZ to rotate leftward : Control the PTZ to rotate rightward : Control the PTZ to rotate 360 degrees automatically +: Adjust Zoom+, Focus+, Iris+.
-
Page 29: Record
Wireless NVR System User Manual 8. Right click mouse to back to setup interface, click “Apply” to save settings. Tips: Presets are the tour spots, the PTZ tour from small to large spots automatically. Keep time is the time length that the PTZ will stay at a preset. ... -
Page 30: Motion Detection Record
Wireless NVR System User Manual Image32 3. Choose the Channel and Weekday from drop-down menu. 4. Set the Schedule time, and check “Time”. 5. Click “Copy to” if you want to apply the settings to other channel or all channels. 6. -
Page 31: Alarm Triggered Record
Wireless NVR System User Manual 4) Click “Apply” to save settings. Tips: If you want to set motion detection recording for other channels, repeat above steps The default sensitivity is set to be “High” Image 33 4.6.4 Alarm-triggered Recording Function Description: Enable alarm-triggered recording, system will starts recording when any alarm input is detected. -
Page 32: Video Playback
Wireless NVR System User Manual menu, set work Mode is “Enable”. 3. Select the “Record channel”. 4. Please refer to “4.6.2 Time-scheduled Recording Setup” to set the Alarm-triggered Recording; make sure to check the “Alarm” box. 5. Click “OK” to save the settings. Tips: ... -
Page 33: Video Backup
Wireless NVR System User Manual Operation Steps: 1. Right click mouse in your system, choose “Video playback” 2. Choose “Manual Search” from sub-menu to enter “Video playback” interface, as shown is Image Figure 36 1. Select the Channel and Record mode. 2. - Page 34 Wireless NVR System User Manual 1. Inset the USB flash disk to any of the NVR’s USB port. 2. Right click mouse in your system, choose “Video backup” to enter the video backup interface, as shown in Image 38. Image 38 3.
-
Page 35: Alarm
Wireless NVR System User Manual 4.9 Alarm 4.9.1 Motion Detection Alarm Function Description: When system detects motion detection in the selected area, it will trigger alarm and output alarm. Operation Steps: 1. Right click mouse in your system, choose “System setup” to enter the system setup interface 2. -
Page 36: Video Loss Alarm
Wireless NVR System User Manual If you set certain areas to be excluded from the detect areas and you still get alarm (such as buzzer), it could be triggered by other channels.(channel 2, channel 3, channel 4…) 4.9.2 Video Loss Alarm Function Description: If any channel lost video, users get alarms. -
Page 37: Time Settings
Wireless NVR System User Manual Image 42 Detailed Operation Explanations: Operation Object Explanation Automatic Log out Choose whether the system log out automatically without operation Keyboard Sound Choose whether to turn on the sound of pressing on keyboard Language Choose different language accordingly Remote Control Choose whether to use remote control Boot Wizard... -
Page 38: Screen Settings
Wireless NVR System User Manual Image 43 4.10.3 Screen setup Function Description: Set the screen parameters. Operation Steps: Right click mouse in your system, choose “System setup” – “General setup” – “Screen setup”, you’ll see below interface, as shown in Image 44. Image 44 Operation Instructions: Operation Object... -
Page 39: Hard Drive Settings
Wireless NVR System User Manual Camera Title Modify the Camera Title Color adjust Set the color tone, brightness, saturation, and contrast OSD Alpha Modify the OSD Alpha VGA resolution Select the correct screen resolution Auto Switch Whether to enable auto switch and set the switch time Tips: ... -
Page 40: Device Maintenance And Management
Wireless NVR System User Manual 5. Click the hard drive to format it if needed. 6. Select “Customize” in drop-down menu and set the days (auto delete files of how many days before) if you want to auto delete old files. 7. - Page 41 Wireless NVR System User Manual HDD Information Function Description: User can check the installed hard drive’s information here, including Model, Capacity, Used and Status. Operation Steps: Right click mouse in your system, choose “System setup” – “System Admin” – “HDD Information”, you’ll see below interface, as shown in Image 47.
-
Page 42: User Management
Wireless NVR System User Manual 2. Select the Event type from drop-down box. 3. Set the From time and Till time, click “Search”, you’ll see the log information displayed there. Tips: Click left and right arrow to read previous and next page’s log information ... - Page 43 Wireless NVR System User Manual Image 50 3. Input the new user’s Username and Password. 4. Select the permissions you’d like to apply to this user. Administrator has all permissions in default. 5. Click “OK” to save settings, you can see newly added user in the user list. Permission Description: Video playback: Able to search and playback videos stored in the hard drive Video backup: Able to back up the videos stored in the hard drive via USB flash disk...
- Page 44 Wireless NVR System User Manual Image 51 3. Click “OK” to confirm delete users, then you’ll see this user is no longer exist in the list, as shown in Image 52. Image 52 Tips: Administrator cannot be deleted. Edit user Operation Steps: 1.
-
Page 45: Restore Factory Settings
Wireless NVR System User Manual Tips: Administrator cannot be edited. Change password Operation Steps: 1. Right click mouse in your system, choose “System setup” – “System Admin” – “User management”. 2. Select any of the users, click “Change password” to enter the change password interface, as shown in Figure 54. -
Page 46: System Maintenance
Wireless NVR System User Manual Image 55 2. Check the options you want to restore factory defaults, click “Apply”. 3. Click “OK” when confirmation message pops out. 4.11.4 System maintenance Function Description: NVR maintenance is used for firmware upgrade for users. Operation Steps: 1. -
Page 47: Access System From Webpage
Wireless NVR System User Manual 4. Select the software upgrade type from drop-down, click “Start” and “Yes” when prompt box pops out. 5. You can see the system upgrade progress in the progress bar, waiting for the system to finish upgrading and it will restart automatically when finish. - Page 48 Wireless NVR System User Manual Image 60 6. If for first time use, please download and run the WebClient.exe control according to the prompt message, as shown in Image 61. Image 61 7. Login again to live view your system, as shown in Image 62. Image 62 Tips:...
-
Page 49: Live View
Wireless NVR System User Manual IP address can be found in “System Setup” – “Network Setup” Supports multiple users to view simultaneously from different PC If the WEB port has been changed (default port is 80), then you’ll need to add port number when input IP address in the browser, for example: http://192.168.1.28:102 (port is 102) -
Page 50: Playback
Wireless NVR System User Manual Channel List Control Image 64 Turn ON/OFF Volume Configure Tips: Supports 1, 4, 9, 16, 25, 36 split screen, means you can view 1, 4, 9, 16, 25, 36 channels simultaneously Supports Main Stream and Sub Stream two options 5.2.3 Playback Operation Steps:... -
Page 51: Configure
Wireless NVR System User Manual permission for this user. 5.2.4 Configure Operation Steps: 1. Click “Configure” button in live view interface 2. Enter the configure interface, as shown in Image 65. Image 65 Tips: The details of configure, please refer to system function introduction ... - Page 52 Wireless NVR System User Manual Image 66 3. Enter the correct device ID, user name and password. 4. Click login to enter live view interface, as shown in Image 67. Image 67 Tips: Get the device ID by go to “System Setup” - “Network Setting” and check Eseenet(P2P), device will then be displayed ...
-
Page 53: Login With User Id
Wireless NVR System User Manual 5.3.2 Log in with User ID Function Description: Log in with user name can solve the limitation of managing only one device by log in with device ID Operation Steps: 1. Open your browser. 2. Enter http://www.e-seenet.com, choose “Log in with Username”, as shown in Image 68. - Page 54 Wireless NVR System User Manual 2. Add Device 1) Open your mobile app and click “+” to add device 2) Input the system’s connection information, as shown in Image 69 Image 69 3) OK and go back to device list, click the device name to view live video, as shown in Image 70.
- Page 55 Wireless NVR System User Manual Image 70 Stop Capture snapshot Record Video to mobile Settings 3. Remote Playback...
-
Page 56: Appendix
Wireless NVR System User Manual Image 71 7. Appendix 7.1 Hard Drive Capacity Unit Conversion Device Capacity Unit Conversion Operation System Capacity Unit Conversion 1 B ＝ 8 b 1 B ＝ 8 b 1 MB ＝ 1000 KB 1 MB ＝ 1024 KB 1 GB ＝...