Stream Setting - xmartO WOS1388 User Manual

Wireless NVR System User Manual

4.3.5 Stream Setting

Function Description: Set the IP Camera information, including stream, resolution, rate, frame rate,
frame rate interval, H.264 coding grade, and etc.
Operation Steps:
1. Right click mouse in your system, choose "IPC Add" from the drop-down menu to enter Video
Manage interface.
2. Choose any of the IP Cameras and click "Stream Setup", you should then see below interface
(Figure 21). You can set all the stream information here. Click "Apply" to save the settings and click
"OK" to exit.
Tips:
1. For Stream, there are two options: Main Stream and Sub-stream. In good network conditions,
you can choose Main Stream to obtain better image quality; while under relatively bad network
conditions, we suggest you choose Sub-stream to ensure the smooth flow of video.
2. For Resolution, there are many choices, such as 720*576, 960*576, 1280*720, and more. The
higher you set the resolution to, the better the image quality you will get.
Figure 20
Figure 21
19