Repeater - xmartO WNV14 User Manual

Wireless NVR System User Manual
manage interface.
2) Select one channel and click "Manual Edit", you shall then see below Interface, as shown in image
23.
3) Check Enable, you'll be able to change the channel information here.
Image 23

4.3.7 Repeater

Function: Setup Dream Liner feature to boost the wifi signal of xmartO system.
The xmartO Dream Liner technology uses cameras in middle as repeaters. That way, further cameras
connect to closer cameras 1st, and then to the NVR as a group. This theoretically doubles/ triples the
current WiFi distance.
Operation Steps:
1) Right click your mouse, click Device Manage – Repeater, you'll enter repeater setting page, as
shown in image 24.
22