E-Mail - xmartO WNV14 User Manual

Wireless NVR System User Manual
2) Check "Enable" to enable FTP function.
3) Enter the FTP Server, Port, Username and Password.
4) Set "Schedule" and click "Test" to check if it is set successfully, if yes, click "Apply" to save the
settings, and click "OK" to exit.

4.4.4 E-Mail

Function: Set up motion detection email alerts.
Operation Steps:
1) Right click the mouse to pop out NVR main menu, then click System setting – Network setting –
E-Mail, you'll see below interface, as shown in image 34.
Image 33
Image 34
31