Alarm Triggered Record - xmartO WOS1388 User Manual

Wireless NVR System User Manual
4) Click "Apply" to save settings.
Tips:
 If you want to set motion detection recording for other channels, repeat above steps
 The default sensitivity is set to be "High"
Image 33
4.6.4 Alarm-triggered Recording
Function Description: Enable alarm-triggered recording, system will starts recording when any alarm
input is detected.
Operation Steps:
1. Right click mouse in your system, and choose "System setup" - "Record Plan" - "Sensor setup",
you'll then see below interface, as shown in Image 34.
Figure 34
2. Select the channel you want to set as Alarm-triggered Recording from "Channel" drop-down
30