≥ Set INPUT1, 2 switches to LINE or MIC if you connect equipment not compatible with
+48 V. You can damage this unit or such equipment if you leave the setting at [+48V].
≥ This unit is turned off when a problem occurs with the +48 V power supply.
≥ The battery will discharge faster if you use a phantom microphone.
≥ If there is noticeable noise coming from the terminal that is not in use, set the corresponding
INPUT switch (INPUT1, 2) to LINE.
Adjusting the audio input level
Selecting an adjustment method
You can set how to adjust the audio input level for each audio channel. For audio channel 1, select
[AUDIO LEVEL CH1]; for audio channel 2, select [AUDIO LEVEL CH2].
1
Select the menu.
MENU
: [AUDIO SETUP] #
[AUTO]
:
[MANUAL]
:
2
(If you have set to [
Adjust the input level operating the AUDIO LEVEL CH1/AUDIO LEVEL CH2
knobs.
MNL
MNL
≥ Adjust confirming the audio level meter.
[
AUDIO LEVEL CH1
Adjusts the level automatically.
Adjusts the level manually.
MANUAL]
)
A AUDIO LEVEL CH1/AUDIO LEVEL CH2 knobs
B Audio level meter
C -12 dB
D 0 dB
] or [
AUDIO LEVEL CH2
- 76 -
]
# desired setting
CH1
AUDIO
LEVEL
CH2