Table of Contents
Advertisement
During thumbnail and menu operation
Display
NO DATA.
CANNOT DELETE.
CARD ERROR.
PLEASE REFORMAT.
UNABLE TO FORMAT.
Cannot delete data on
card.
CANNOT PROTECT.
CANNOT RESET
NUMBER.
THUMBNAIL RECOVERY
HAS FAILED.
THUMBNAIL DATA
ERROR IS DETECTED.
CAN NOT SELECT MORE
SCENES.
SCENE FILE WRITE
FAILED
Description
There are no scenes in the
currently selected recording
mode option and recording
format option.
The content versions do not
match. This is displayed when
you try to delete scenes
recorded with another device,
for example.
This is displayed when the SD
card cannot be formatted.
Formatting is not possible due
to, for example, a problem with
the SD card.
The SD card cannot be
formatted.
The content versions do not
match. This is displayed when
you try to set protection for
scenes recorded with another
device, for example.
The SD card cannot be used
with this unit.
This is displayed if the SD card
is removed or writing to the SD
card fails while recovery is in
progress.
This is displayed when
thumbnail information is not
recorded correctly.
The number of scenes that can
be selected with this unit has
reached the maximum limit.
This is displayed if the SD card
is removed or writing to the SD
card fails while a scene file is
being saved.
- 208 -
Behavior and cause
≥ Select a recording mode option
or recording format option
containing recorded scenes.
≥ Match the device and content
version.
≥ Check the SD card.
≥ Replace the SD card in the card
slot at which the error has
occurred.
≥ Check the SD card.
≥ Match the device and content
version.
≥ Insert a recordable SD card.
≥ Check the SD card.
≥ The applicable thumbnail
information will be recovered
after this message disappears.
≥ Reselect scenes after finishing
the current editing task.
≥ Check the SD card.
Advertisement
Table of Contents
