Playing Back The External Media - Panasonic HC-X1 Operating Instructions Manual

Playing back the External Media

≥ Only motion picture/still picture that have been copied by connecting this unit to the
external media device can be played back.
A USB Cable (supplied with USB HDD)
B USB HDD (commercially-available)
C USB flash memory (commercially-available)
1
Connect this unit to the external media device to prepare for playback.
(l 136)
≥ When playing back on an external monitor, connect this unit to the external monitor.
2
Touch [Playback from External Media].
3
Touch the scene or still picture to be played back and then play it back.
≥ The playback operation is performed the same as when playing back motion pictures or still
pictures. (l 114, 117)
To terminate the connection between this unit and the external media device
Touch the play mode select icon
≥ Disconnect the USB Cable from this unit.
≥ It is also possible to switch the media to play back by touching the play mode select icon.
When the external media device is connected, the
from the displayed media types.
≥ In the following cases, when you have touched a play mode select icon and selected the
recording format for playback, this unit will be restarted to change the system frequency. After the
restart, perform Step 2.
j When you have switched recording format from [4K/24.00p] to a different option.
j When you have switched recording format from an option other than [4K/24.00p] to [4K/24.00p]
≥ Deleting scenes and still pictures on the external media device may take time.
≥ You cannot set the [SCENE PROTECT] during playback of
USB
HOST
(l 113) and then touch
(l 113)
- 140 -

.
(external media device) can be selected
(external media device).
(l 126)
(l 122)