Panasonic HC-X1 Operating Instructions Manual page 61

Using Focus Transition
≥ Select the [FOCUS TRANSITION] menu.
≥ Register [FOCUS TRANS] to a USER button.
1
Switch to Manual Focus Mode.
2
Press the USER button to which [
applicable USER button icon.
3
Touch a registered item ([1]s[3]).
≥ Focus Transition will start. Focus will shift slowly from the
current position to the registered position. This will take a
few seconds. (l 62)
≥ As the focus shifts, the Focus Transition bar will move
from [S] to [E].
4
Touch [EXIT] to exit Focus Transition.
≥ If you move this unit a lot after setting the focus position, focus may not stop at the set position.
≥ When Focus Transition is in use, focus cannot be adjusted with the focus ring.
≥ Focus Transition is not available in the following cases:
j When Auto Focus is used
j During Freeze Frame
j During Super Slow Recording
j In Variable Frame Rate Mode
j When color bars are displayed.
j When a remote control (commercially-available) is connected
j During AG ROP application connection
≥ Focus Transition settings are canceled in the following cases. To use Focus Transition again,
register a focus position again.
j If you turn the unit off
j If you press the THUMBNAIL button
j If you operate the zoom
j If you enable or disable Infrared Recording Mode
≥ When Focus Transition is in use, only the USER button functions below are available. Press the
applicable USER button (one of the USER buttons 5 to 9 button) to use them.
j [FOCUS ASSIST 1]
j [FOCUS ASSIST 2]
j [FOCUS TRANS]
j [IR REC]
j [BACKGROUND]
≥ You can switch between the items or exit Focus Transition by pressing the USER buttons 1 s 4.
USER button
USER1 to USER3
≥ When using Focus Transition, functions registered to the USER buttons 1 s 4 do not work with the USER buttons.
(l 89)
(l 103)
(l 100)
(l 106)
(l 60)
USER4
( )
l 60
(l 82)
(l 52)
] is registered or touch the
FOCUS TRANS
(l 141)
j [PRE-REC]
j [USB MODE]
j [EVF ON/OFF]
j [AUTO REC]
j [MENU]
Corresponding setting
- 61 -
S
1 2


A [EXIT]
B Focus Transition bar
(l 125)
(l 84)
[1] to [3]
[EXIT]
MF50 MF50 MF50
E
3