Panasonic HC-X1 Operating Instructions Manual page 99

4 Press USER button or touch USER button icon in the recording screen.
≥ This will display
≥ To stop recording to the external device, press the applicable USER button or touch the
applicable USER button icon again. This will display
device instructing it to stop recording.
[AF AREA]
≥ Register [AF AREA] to a USER button.
You can adjust the area width where Auto Focus works according to the size of the subject.
1 Press USER button or touch USER button icon in the recording screen.
are displayed on the screen.
≥
AF-AREA
2 Rotate the jog dial to adjust the AF area
frame.
3 Push the jog dial to fin
≥ Press USER button or touch the USER button icon to cancel the setting.
≥ To adjust the AF area frame again, press the jog dial while the on-screen
icon [ AF AREA] (yellow) is displayed, and repeat Steps 2s3.
≥ For information on on-screen icons, refer to 111.
and send a signal to the external device instructing it to start recording.
(l
ish the adjustment
- 99 -
and send a signal to the external
82)

A [AF AREA]
B AF area frame
.

(l 55)