Table of Contents
Advertisement
Adjusting the audio input level
∫ Adjusting the input level of the built-in microphone (5.1 ch)
≥ Set the [MIC SETUP] to anything other than [2ch].
1
Select the menu.
MENU
: [RECORD SETUP] # [5.1ch MIC LEVEL] # desired setting
[AUTO]:
[SET]/[SETr
2
(When [SET]/[SET
Touch
/
level.
≥ Touching
allows you to set ALC to on/off. When ALC
is activated, the icon is surrounded by yellow and the
amount of sound distortion can be reduced. When ALC is
deactivated, natural recording can be performed.
≥ Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the sound
is distorted.) Select a lower setting for microphone input
level.
3
Touch [ENTER] to set the microphone input
level and then touch [EXIT].
is displayed on the recording screen when the ALC
≥
is turned on.
≥ When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom rate.
≥ You cannot record with the audio completely muted.
ALC is activated, and the recording level is adjusted automatically.
]:
The desired recording level can be set.
r
] is selected)
to adjust the microphone input
(l
45)
A Center
B Front left
C Back left
D Front right
E Back right
F Microphone input level
- 49 -
Advertisement
Table of Contents
