Table of Contents
Advertisement
≥ By default the following values are set for [F1:] in [FILE SELECT]
j SAT: "0"
j PHASE: "0"
[MASTER PED]
Adjustment of black level based on the image is performed.
1
Touch [MASTER PED].
2
Touch
/
≥ You can select a value between s150 and r150.
3
Touch [EXIT] to exit the menu screen.
≥ The default setting that is assigned to [F1:] in [FILE SELECT] is "0".
[GAMMA MODE]
Tone or contrast of the image is set in accordance with the recorded scenes.
1
Touch [GAMMA MODE].
2
Touch
/
[HD]:
[SD]:
[FILMLIKE1]:
[FILMLIKE2]:
[FILMLIKE3]:
[CINE-LIKE V]:
[CINE-LIKE D]:
[STILL-LIKE]:
3
Touch [EXIT] to exit the menu screen.
≥ When [CINE-LIKE V] or [CINE-LIKE D] is selected, we recommend that you set the lens aperture
to a level lower than the normal lens iris level (approximately 1/2) to fully utilize the feature of the
selected setting.
[BLACK GAMMA]
This sets the gamma curve of dark areas.
1
Touch [BLACK GAMMA].
2
Touch
/
≥ You can select a value between s8 and r8.
≥ Making adjustments in the – direction compresses dark areas, while making adjustments in the +
direction expands them.
3
Touch [EXIT] to complete the setting.
≥ The default setting that is assigned to [F1:] in [FILE SELECT] is "0".
to adjust the black level.
to select the setting item.
This is the video gamma feature for HD (High Definition).
This increases gain in darker areas more than [HD] does.
This feature reproduces highlight areas more than [HD] does.
This feature reproduces highlight areas more than [FILMLIKE1] does.
This feature reproduces highlight areas more than [FILMLIKE2] does.
This gamma feature creates cinematic images with sharper contrast.
This gamma feature creates cinematic images.
Expresses colors in a picture tone similar to that produced with a digital
still camera.
to adjust settings.
- 157 -
Advertisement
Table of Contents
