Table of Contents
Advertisement
Switching the screen indications/mode information
display
DISP/MODE CHK button
When the DISP/MODE CHK button is pressed, all screen displays disappear, except for the
counter display, time stamp display*, zebra pattern display, marker display, and safety zone
display.
(l
203)
* When [DATE/TIME] is set to [TIME], [DATE], or [DATE&TIME]
≥ To cancel the setting, press the DISP/MODE CHK button.
∫ To display the Mode Information
Press and hold the DISP/MODE CHK button to display the mode information screen first. Each time
you press the button, the display mode of the screen switches in the following order:
Mode information display1 # Mode information display2 # Mode information display3 #
Mode information display4 # Mode information display5 # Normal display
Mode information display1: Displays the list of functions assigned to the USER buttons
Mode information display2: Displays the title given to each scene number of a scene file.
Mode information display3: Displays the settings assigned to the GAIN button ([GAIN L]/
Mode information display4: Displays the settings for [REMOTE REC], [REMOTE REC LINK],
Mode information display5: Displays the settings for [AUDIO LOW CUT CH1], [AUDIO LOW
(USER1 to 9).
[GAIN M]/[GAIN H]), the White Balance mode settings assigned to
the WHITE BAL button ([WHITE BAL A]/[WHITE BAL B]/[WHITE
BAL PRST]), and the setting status of the White Balance modes
[Ach] and [Bch] ([AWB A]/[AWB B]).
[HDMI TC OUTPUT], [CAMERA NUMBER], [SUB REC BUTTON]
and [SUB ZOOM].
CUT CH2], [AUDIO LEVEL CH1], [AUDIO LEVEL CH2], [INPUT1
LINE LEVEL], [INPUT2 LINE LEVEL], [INPUT1 MIC LEVEL] and
[INPUT2 MIC LEVEL].
- 108 -
Advertisement
Table of Contents
