Panasonic HC-X1 Operating Instructions Manual page 185

≥ In the following cases, even when [TIME STAMP] is set to [ON], the date and time of recording
are not displayed:
j When [REC FORMAT] is set to [SA 480/59.94i] or [SA 576/50.00i]
j When [2 SLOTS FUNC.] is set to [DUAL CODEC]
j When [DATE/TIME] is set to [OFF]
j During Freeze Frame
j During Super Slow Recording
j In Variable Frame Rate Mode
≥ Even when [VIDEO OUT OSD] is set to [OFF], the date and time of recording are displayed on
the external monitor screen.
≥ The date and time of recording displayed during [TIME STAMP] recording and the date and time
displayed during the playback of the image may not exactly be the same.
[DF MODE]
Selects the compensation mode for the time code.
≥ Set [SYSTEM FREQ] to [59.94Hz].
[DF]/[NDF]
[TCG]
Sets the way the time code will move.
[FREE RUN]/[REC RUN]
[TC PRESET]
Initial value of the time code can be set.
[UB PRESET]
≥ Set [REC MODE] to [AVCHD].
User Information can be set.
(l 89)
(l 103)
(l 100)
(l 127)
(l 160)
(l 79)
(l 80)
(l 160)
(l 80)
- 185 -
(l
(l 177)
(l 79)
161)