Setting Up A Connection Manually - Panasonic HC-X1 Operating Instructions Manual

4k video camera
Hide thumbs Also See for HC-X1:
Table of Contents

Advertisement

≥ [SSID(SELECT)] is available only when [USB MODE] is set to [ON], [USB MODE SELECT] is set
to [HOST] and a wireless module that supports this unit is attached.
≥ Depending on your environment, the communication speed may become slower or the wireless
access point may not be available for use.
≥ When [DHCP] in [Wireless LAN setup] is set to [OFF] or [CLIENT], apply the [IP Address] setting
to [AG ROP] in [Settings]
AG ROP app.

∫ Setting up a connection manually

≥ Attach a wireless module that support this unit to the USB HOST terminal of this unit.
(l
142)
≥ Set [USB MODE SELECT] to [HOST].
≥ Set [USB MODE] to [ON].
1
Select the menu.
MENU
: [NETWORK SETUP] # [WIRELESS SETUP]# [SSID(MANUAL)]
2
Touch and set the desired items as needed.
≥ All default settings are indicated with underlined text.
[SSID]:
[SECURITY TYPE]:
[Password]:
≥ When [SSID(MANUAL)] is selected, [BAND] is fixed to [2.4GHz], and [CHANNEL (2.4GHz)] and
[CHANNEL (5GHz)] are fixed to [AUTO].
≥ For details on how to enter characters, refer to page 144.
3
Touch [EXIT].
4
Check the network connection.
≥ When the connection is complete,
≥ To terminate the connection, after terminating the connection on the iPad side, set [USB MODE]
to [OFF].
≥ Depending on your environment, the communication speed may become slower or the wireless
access point may not be available for use.
≥ When [DHCP] in [Wireless LAN setup] is set to [OFF] or [CLIENT], apply the [IP Address] setting
to [AG ROP] in [Settings]
AG ROP app.
(l
145) on the iPad. For details, refer to [CONNECTION] in Help of the
(l
(l
197)
Enter the SSID for the wireless access point to connect to.
≥ This item is not set by default.
Set the network authentication and encryption types.
[WPA2-AES]/[WPA-AES]/[WPA2-TKIP]/[WPA-TKIP]/[NONE]
Enter the password for the wireless access point to be connected.
≥ This item is not set by default.
≥ This item is not available when [SECURITY TYPE] is set to [NONE].
is displayed on the screen of this unit.
(l
145) on the iPad. For details, refer to [CONNECTION] in Help of the
197)
- 148 -

Advertisement

Table of Contents
loading

Table of Contents