Table of Contents
Advertisement
External monitor
You can connect this unit to an external monitor as shown in the figure below.
VIDEO
A HDMI Cable (commercially-available)
B AV cable (commercially-available)
≥ To use an AV cable for external output
C External monitor
≥ By connecting this unit to an external monitor that supports 4K motion picture with an HDMI cable
and play back scenes recorded with their size in [REC FORMAT] set to 4K (4096k2160) or UHD
(3840k2160), you can enjoy finely-detailed 4K motion pictures. If 4K motion picture is not
supported on your external monitor, you can change the [RESOLUTION] setting so that 4K
motion pictures can be played back at a lower resolution.
≥ To play back scenes recorded with a [REC FORMAT] setting of [UHD 2160/59.94p 150M] or
[UHD 2160/50.00p 150M], an external monitor that supports 4K/60p (50p) is required.
If 4K/30p (25p) is supported on your external monitor, you can change the
[HDMI UHD OUTPUT LIMIT] setting so that 4K motion pictures can be played back at a lower
output frame rate.
≥ If you set [REC FORMAT] to [UHD 2160/59.94p 150M] or [UHD 2160/50.00p 150M] in Recording
Mode and then connect this unit to a 4K-compatible external monitor with an HDMI cable, images
will be output in 3840k2160 when recording is stopped and in 1920k1080 during recording or
PRE-REC. Please note that the image on the screen of this unit and on the external monitor
disappears for a few seconds every time you start or stop recording or every time you switch the
PRE-REC on/off.
These irregularities do not occur when [RESOLUTION] is set to [1080p] or [1080i], which outputs
images in 1920k1080.
OUT
CH1
AUDIO OUT
CH2
(l
189)
(l
128)
- 126 -
Advertisement
Table of Contents
