Table of Contents
Advertisement
Recording
White Balance
Automatic White Balance function may not reproduce natural colors depending on the scenes or
lighting conditions. If so, you can adjust the White Balance manually.
5600K
A White Balance
B Color temperature display
≥ Displayed when the White Balance mode is set to Ach or Bch.
≥ The color temperature display is not guaranteed to indicate an exact value. Use the indicated
value only as a guide.
1 Jog dial
2 WHITE BAL button
≥ Register [AWB] to a USER button.
This function is registered to the USER9 button by default.
≥ Switch to Manual Mode.
1
Press the WHITE BAL button to switch to [Ach], [Bch], or [PRST].
≥ The setting changes each time you press the button.
[Ach] # [Bch] # [PRST]
≥ If you switch to [PRST], the White Balance mode set in [WB PRESET] will be displayed.
2
(If you have switched to [
Press the USER button to which [AWB] is registered or touch the applicable
USER button icon to change the White Balance mode.
≥ The mode will change each time you press the USER button to which [AWB] is registered or
touch the applicable USER button icon.
[P3200K] # [P5600K] # [VAR]
≥ It is not possible to change the White Balance mode without registering [AWB] to a USER button.
≥ If you set the White Balance mode to [ ATW ] in by following either of the procedures below, the
White Balance mode cannot be changed even if you press the USER button to which [AWB] is
registered or touch the applicable USER button icon.
j Pressing the USER button to which [ATW] is registered
j Pressing the WHITE BAL button to switch to the item (Ach/Bch/PRST) setting in [ATW SET]
(l
170)
Ach
(l
(l
44)
])
PRST
82)
(l
- 63 -
WHITE BAL
82, 87)
Advertisement
Table of Contents
