Account Code
Defining the Entry Mode
52
From software version 2.2:
If you specified Code entries or Code
length as verification procedure, the user
must no longer enter # to confirm entry of
the account code.
You can define one of two criteria for account code
entry for each trunk group.
Non-Verified Entry (Default)
You can enter an account code on any telephone
before a call is initiated and, therefore, also before
a trunk is seized. While a call is in progress, you can
enter an account code only from a system tele-
phone.
Forced Entry
You must enter an account code before a call is ini-
tiated (after a trunk group is seized). The account
code is then verified in accordance with the variant
you have programmed (
Account code entry is not mandatory for incoming
calls.
Æ
51).