Date - Siemens Hicom 150 E User Manual

Date

Date
1.
2.
1 7 1 1
30
The date is stored automatically after an outgoing
external call has been set up, provided that the
ISDN makes this information available.
If this is not the case or if your system is not con-
nected to ISDN trunks, you can enter or modify the
date yourself.
Prerequisite:
System administration has been started (
Check the display. Select " 13 Date" and confirm
your selection or enter the prompted code.
or
1 3
Enter code.
From this point on, simply follow the user
prompts.
Note the data format required for date entry: For-
mat: ddmmyy (dd = day as two digits; mm =
9 8
month as two digits; yy = year as two digits).
For example, if 171198 is entered, the telephone
display will read November 17, 1998.
Æ
20).