Changing The Cmi Logon Code (Not For U.s.) - Siemens Hicom 150 E User Manual

Changing the CMI Logon Code (Not for U.S.)

Changing the CMI Logon Code (Not for
U.S.)
1.
2.
62
Before you can log on to a CMI (cordless multicell
integration telephone), you must enter a code (de-
fault code = 19 97 07 07) to place your system in
log on mode.
You can change the default code. Please make a
note of the new code, because not even the ser-
vice technician can determine the code later on.
Prerequisite:
System administration has been started (
Check the display. Select " 23 Code, CMI" and
confirm your selection or enter the prompted
code.
or
2 3
Enter code.
From this point on, simply follow the user
prompts.
Æ
20)