Copy paper/originals
1
In the Basic screen, touch [Paper].
The Paper screen appears.
2
Select the button for the tray 1.
–
To specify a setting for non-standard-sized paper loaded into the bypass tray, touch the button for
the bypass tray.
3
Touch [Change Settings].
4
Touch [Custom Size].
The Custom Size screen appears.
5
Type in the length (X) and width (Y) of the paper.
–
Make sure that [X] is selected, and then use the keypad to type in the length of side X (between 139.7
mm and 457.2 mm).
–
Touch [Y] to select it, and then use the keypad to type in the length of side Y (between 90.0 mm and
311.1 mm).
C200
6
6-9