Rack Stability - HP StorageWorks Director 2/140 Installation Manual

Rack stability

Rack stability protects personnel and equipment.
Director 2/140 Installation Guide
Power supplies or systems marked with these symbols indicate
the presence of multiple sources of power.
WARNING:
shock, remove all power cords to completely disconnect power
from the power supplies and systems.
Any product or assembly marked with these symbols indicates that the
component exceeds the recommended weight for one individual to
handle safely.
WARNING: To reduce the risk of personal injury or damage to the
equipment, observe local occupational health and safety requirements
and guidelines for manually handling material.
WARNING: To reduce the risk of personal injury or damage to the
equipment, be sure that:
The leveling jacks are extended to the floor.
The full weight of the rack rests on the leveling jacks.
In single rack installations, the stabilizing feet are attached to the rack.
In multiple rack installations, the racks are coupled.
Only one rack component is extended at any time. A rack may become
unstable if more than one rack component is extended for any reason.
To reduce the risk of personal injury from electrical
About this Guide
15