3.12.2 CDR (Call Detail Record)
Item names are not recorded in the CDR file.
When the following operations are performed, CDR data is recorded as follows:
Pattern A: Extension (102) calls to extension (201). Extension (201) answers the call, and starts the
Extension (201) uses an Account code to call an analog trunk.
(Account code: 55555, destination number: 1234567890, Analog trunk port: 4)
Used as developer's information.
n indicates the port number as follows:
n = 1—8: Trunk port (1—8)
n = 9—32: Extension port (1—24)
n = 33—34: Doorphone port (1—2)
m is used as developer's information.
n shows SIP phone user name. Refer to SIP User Name in
2.3.1 PBX Configuration—[2-1] Extension—Port in the
Programming Item List.
yyyyyyyy is used as developer's information.
n indicates information as follows:
"carrier1_": Carrier 1
"carrier2_": Carrier 2
Authentication ID: SIP carrier's Authentication ID. Refer to
2.4.7 PBX Configuration—[3-7] Trunk—SIP Trunk
Property in the Programming Item List.
qqqqqqqq is used as developer's information.