Paging Features; Paging - Panasonic KX-HTS824 Feature Manual

Conditions
SLT and KX-NTV series cannot access a Meet-me conference room.
When only one party is in the conference room, Music on hold will be
heard
If the wrong access code is entered, the extension user will hear the
busy tone.
2.7 PBX Configuration—[6] Conference—Meet Me

3.10 Paging Features

3.10.1 Paging

Description
An extension user can make a voice announcement to many destinations simultaneously.
The message is announced over the built-in speakers of SIP phones which belong to the extension group.
Operation
[Paging Execution]
While a dial tone is being heard, enter a Paging feature number and a Group Number (2 digits) (Refer to
2.1.1 Feature Number Lists for User).
After a confirmation tone is heard on the Paging device, Paging will operate.
Conditions
•
Only KX-HDV series SIP phones can make a paging call.
•
Paging targets are the SIP extensions only.
Up to four extensions will be paged within the member extensions of
the Extension Group. Paging will start from the oldest affiliated
registered extension in the Extension Group.
Paging type for each Extension Group can be selected as follows
(default: One-way):
•
One-way: Extension group members can hear paging
announcements, but they cannot answer paging announcements.
•
Two-way: Extension group members can hear paging
announcements, and they can answer paging announcements.
Paging call can be made while the extensions are waiting. If Paging
call becomes impossible during a Paging call, Paging will be
canceled only for that extension.
When DND is set for extensions, Paging is not available to the
extension and Paging will not work.
Conditions
PIL Reference
Conditions
3.10 Paging Features
Note
Note
Refer to 3.1.12 Extension Group
Call
Feature Manual 59