Download  Print this page

Extension Dial Lock - Panasonic KX-HTS824 Feature Manual

Hybrid ip-pbx.
Hide thumbs

Advertisement

3.4.5 Extension Dial Lock

Call Duration timers can be programmed individually as follows:
(1). Extension-CO/Extension Duration Time (x60s)
(2). CO-CO Duration Time (x60s)
Once a call duration timer starts, it continues even if the call is on
hold, the held call is retrieved by another extension, or transferred to
another extension.
2.2.5 PBX Configuration—[1-5] System—Timers
2.3.1 PBX Configuration—[2-1] Extension—Port
3.4.5 Extension Dial Lock
Description
[Local Dial Lock]
Executes Dial Lock (Local Dial Lock) for the extension using a PIN for each extension. It is possible to set
individually for each user using the feature number.
By the user operates Dial Lock, the Operating extension can be set to the pre-programmed TRS level.
(Refer to 3.4.1 Toll Restriction (TRS))
Using this method, an outgoing call cannot be made from that extension.
[Remote Dial Lock]
It is possible for Installer to execute Dial Lock (Remote Dial Lock) for other extensions through Web
Maintenance Console.
Operation
[Extension PIN Set / Cancel]
Dial the Extension PIN Set / Cancel feature number and enter a predetermined parameter. The extension
PIN can be set 4-10 digits. After hearing a confirmation tone, Set / Cancel the Extension PIN.
(Refer to 2.1.1 Feature Number Lists for User)
[Extension Dial Lock Set/Cancel]
Dial the Extension Dial Lock Set / Cancel feature number and enter a predetermined parameter. After
hearing a confirmation tone, Set / Cancel Extension Dial Lock.
(Refer to 2.1.1 Feature Number Lists for User)
48
Feature Manual
Conditions
PIL Reference
Note
While the timer in (1) is in
operation, if the communication
changes to a Trunk-to-Trunk
call, the timer in (1) continues
and the timer in (2) starts to
operate simultaneously.
The timer in (1) can be set to
none (no limit).
The timer in (2) does not start
when the incoming or outgoing
trunk is a SIP trunk.
If the call is parked, a call
duration timer is stopped. After
the call is retrieved, the timer is
reset. (Refer to 3.7 Holding
Features)

Advertisement

Table of Contents

   Also See for Panasonic KX-HTS824

   Related Manuals for Panasonic KX-HTS824

This manual is also suitable for:

Kx-hts32

Comments to this Manuals

Symbols: 0
Latest comments:
  • avi Jun 07, 2017 07:46:
    kaushdlkas​h ash dkash dkjh kahsdk asdkjha dasd a alskdj asd asdlkkjh asdlkajsd
  • harinarayanmehta May 06, 2017 04:08:
    I AM LIKE THIS SYSTEM PLZ I WANT MANUALS
  • harinarayanmehta May 06, 2017 04:56:
    i am very instructed this system