Call Splitting - Panasonic KX-HTS824 Feature Manual

•
If a call cannot be transferred to the transfer destination (e.g. when the transfer destination is on another
call), the Transfer Recall immediately operates.
Conditions
The following cannot be set as transfer destinations:
•
DISA (Refer to 3.1.4 DISA (Direct Inward System Access))
•
Meet Me (Refer to 3.9.2 Meet-me conference)
•
Doorphone (Refer to 3.11.1 Doorphone Call)
•
Built-in VM (Refer to 5 Voice Mail Features)
•
Paging (Refer to 3.10 Paging Features)
The FWD setting for the transfer destination extension is enabled. If
the FWD destination of the Transfer destination is DISA or Meet-me,
call transferring will be restricted.
A party who is put on Consultation Hold will hear Music on hold
(MOH).
2.2.5 PBX Configuration—[1-5] System—Timers
2.3.1 PBX Configuration—[2-1] Extension—Port

3.8.4 Call Splitting

Description
A KX-HDV series SIP phone user can speak alternately with two parties. Placing the current call on hold
allows the user to speak with the other party.
Operation
While having a call on hold (including Consultation Hold) and having another conversation, pressing the DN
key (that status is holding a call) allows the following operations:
•
The current call → put on hold
•
The call on hold → changes to conversation with the extension
Note
•
For more information about Call Hold and Consultation Hold, refer to 3.7.1 Call Hold and 3.8.1 Call
Transfer-Screened.
•
For more information about the DN key, refer to 4.4 DN Key.
Conditions
A party who is put on hold will hear Music on hold (MOH).
Conditions
PIL Reference
Conditions
3.8.4 Call Splitting
Note
Reference:
3.1.4 DISA (Direct Inward System
Access)
3.9.2 Meet-me conference
Refer to 3.7.3 Music on Hold.
Note
Refer to 3.7.3 Music on Hold.
Feature Manual 57