Download  Print this page

Panasonic KX-HTS824 Feature Manual Page 21

Hybrid ip-pbx.
Hide thumbs

Advertisement

Before modification: 050-1234-5678
After modification: 9-050-1234-5678 (Add "9")
CLI Destination
Directs an incoming call to a pre-programmed destination when the modified number matches the number in
the System Speed Dialing table.
For the incoming call destination setting of System Speed Dialing, the extension number (including floating
extension number) and "Disconnect" can be set as CLI Destination. When "Disconnect" is set, incoming
calls will be disconnected. (Refer to 3.3.1 System Speed Dial)
Searching for the caller name
If System Speed Dialing is searched for the modified number, and the caller name corresponding to the
modified number is registered, the name information of the caller (Display Name) registered in System
Speed Dialing will be sent to an extension when calling the extension. Whether Caller ID or Display Name is
displayed depends on the extension.
For the modification flow of caller numbers, see below:
3.1.1 Calling Line Identification (CLI) Distribution & Call Block
Feature Manual
21

Advertisement

Table of Contents

   Also See for Panasonic KX-HTS824

   Related Manuals for Panasonic KX-HTS824

This manual is also suitable for:

Kx-hts32

Comments to this Manuals

Symbols: 0
Latest comments:
  • avi Jun 07, 2017 07:46:
    kaushdlkas​h ash dkash dkjh kahsdk asdkjha dasd a alskdj asd asdlkkjh asdlkajsd
  • harinarayanmehta May 06, 2017 04:08:
    I AM LIKE THIS SYSTEM PLZ I WANT MANUALS
  • harinarayanmehta May 06, 2017 04:56:
    i am very instructed this system