Page 1
Please read this manual carefully before using this product and save this manual for future use. In particular, be sure to read "1.1 For Your Safety, page 8" before using this product. KX-HTS: Series: PJMPR Software File Version 001.10000 or later Manuals and supporting information are provided on the Panasonic Web site at http://www.panasonic.net/pcc/support/pbx...
Page 2
Introduction About this Programming Item List The Programming Item List is designed to serve as a system programming reference for the Panasonic Hybrid IP-PBX. It explains how to program this PBX using Web Maintenance Console. The Programming Item List is divided into the following sections:...
Page 3
List of Abbreviations List of Abbreviations Refer to List of Abbreviations in the Feature Manual. Programming Item List...
Page 4
List of Abbreviations Programming Item List...
1.1 For Your Safety 1.1 For Your Safety To prevent personal injury and/or damage to property, be sure to observe the following safety precautions. The following symbols classify and describe the level of hazard and injury caused when this unit is operated or handled improperly.
Page 9
Unplug the PBX from the AC outlet if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that the smoke has stopped and contact an authorized Panasonic Factory Service Center. CAUTION •...
1.2 Input Rules 1.2 Input Rules This chapter describes rules regarding input in detail. 1.2.1 Valid characters Describes characters that can be input. An input character check is implemented through Javascript when using Web Maintenance Console, and errors are displayed in a dialog box when invalid characters are input. Valid characters are shown in the following: ASCII code 0x08, 0x0D, 0x20, 0x21-0x7E...
Page 11
1.2.2 Input character restrictions Input Type Valid characters Usage Text Email Numbers <0–9> Characters valid for e-mail text Letters <a–z, A–Z> Others <- _ . * ! # $ % & ' * + / = ? ^ ` { | } ~ @> Text LCD Valid characters and the valid number of characters Character strings displayed in LCD...
Page 12
1.2.2 Input character restrictions Input Type Valid characters Usage Text Numbers <0–9> Acceptable characters for a router Router Letters <a–z, A–Z> Pwd2 Others < except " \ % ` { | } ~ # $ <SP> (Space) <\t> (tab) > Text Numbers <0–9>...
Page 13
1.2.2 Input character restrictions Input Type Valid characters Usage Subnet Numbers <0–9> Mask Others < . > Remarks Prefix description such as "/24" will not be accepted. Input error conditions For the first to fourth octet, only the following values are accepted.
1.3 PC Programming 1.3 PC Programming 1.3.1 Starting Web Maintenance Console System programming, diagnosis and administration can be performed with a PC using Web Maintenance Console. Web Maintenance Console is accessed through a Web browser running on a networked PC. This section describes how to set up and access Web Maintenance Console.
Description Note Type Welcome to WebMC Selects the language to be used Select Panasonic Language in Web Maintenance Console. KX-HTS Follow the on-screen instructions to set the language as necessary. Area Code Selects the area code to be set in Select your country/area.
Page 16
1.4 Easy Setup Wizard Input Screen Name Setting item Description Note Type 5.IP IP Address for Specifies the IP address for the LAN Port-IP LAN port. Address Address IP Address for Displays the Subnet Mask for the LAN Port- LAN port. Subnet Mask Use Built-in Enables the built-in DHCP server.
2.1 Login 2.1 Login 2.1.1 PBX Configuration Setting screen (Default) A Uninstalled Slot B Trunk Slot (Pre-installed) C Extension Slot (Pre-installed) Setting screen (Operation example) When a card is inserted to a vacant slot, the insertion is reflected on the display of the screen. When an SIP extension or a SIP trunk is assigned, each button becomes light blue.
2.1.3 Trunk 2.1.3 Trunk Name Description Trunk Opens the Trunk port setting screen. 2.4.1 PBX Configuration—[3-1] Trunk—Port Trunk number Opens the Trunk number setting screen. 2.1.4 Doorphone Name Description Doorphone Opens the Doorphone port setting screen. 2.3.5 PBX Configuration—[2-5] Extension—Doorphone Doorphone number Opens the Doorphone port setting screen.
2.2 PBX Configuration—[1] System 2.2 PBX Configuration—[1] System 2.2.1 PBX Configuration—[1-1] System—Date & Time Description The date and time of the PBX can be programmed. Screen / Tab Setting item Description Input Type Note 1.Date & Time Setting Indicates the current date Select Time-Date and time.
2.2.2 PBX Configuration—[1-2] System—MOH 2.2.2 PBX Configuration—[1-2] System—MOH Description Sound files on the programmer’s PC can be installed to the PBX for use as Music on Hold (MOH). Screen / Tab Setting item Description Input Type Note 2.MOH Music on Hold Selects a sound source for Radio Music on Hold.
2.2.4 PBX Configuration—[1-4] System—Numbering Plan 2.2.4 PBX Configuration—[1-4] System—Numbering Plan Description Details of the extension numbering schemes, trunk line / trunk group access number, feature access numbers and Redial numbers can be programmed here. Specify the feature number. Screen / Tab Setting item Description Input Type...
Page 23
2.2.4 PBX Configuration—[1-4] System—Numbering Plan Screen / Tab Setting item Description Input Type Note 4.Numbering Setting by Shows a feature number Plan- Extension-*77 of Extension Dial Lock Features Set / Cancel Setting by Shows a feature number Extension-*710 of FWD/DND Set / Cancel: Call from CO &...
2.2.6 PBX Configuration—[1-6] System—System Options 2.2.6 PBX Configuration—[1-6] System—System Options Description Various system settings can be programmed. Screen / Tab Setting item Description Input Type Note 6.System Trunk Access It can be assigned a Radio Options- Priority priority for Idle Line Feature Access.
Page 26
2.2.6 PBX Configuration—[1-6] System—System Options Screen / Tab Setting item Description Input Type Note Receiving Source Reserved. Select -[Reserve] 6.System DSP for VM / DISA Selects the gain for the IP Select Options- -IP Side - Gain1 side (Network to PBX). (Network to PBX) DSP for VM / DISA Selects the gain for the IP...
2.2.7 PBX Configuration—[1-7] System—CDR Screen / Tab Setting item Description Input Type Note DSP for Selects the echo canceller Select Conference-PCM type for the PCM side. Side - Echo Canceller Type DSP for Selects the echo canceller Select Conference-PCM NLP for the PCM side. Side - Echo Canceller NLP DSP for...
2.3 PBX Configuration—[2] Extension 2.3 PBX Configuration—[2] Extension 2.3.1 PBX Configuration—[2-1] Extension—Port Description Settings can be made for each extension port. Click the "Edit" button located next to the extension number to enable editing of the setting values. Screen / Tab Setting item Description Input Type...
Page 29
2.3.1 PBX Configuration—[2-1] Extension—Port Screen / Tab Setting item Description Input Type Note Walking COS Allows the Walking COS Radio feature to be used from a remote location (inside the PBX, or outside the PBX using DISA). • by Other Extension •...
Page 30
2.3.1 PBX Configuration—[2-1] Extension—Port Screen / Tab Setting item Description Input Type Note Current MAC Indicates the current MAC Address address of the SIP Extension (reference only). Phone Location Specifies the type of Radio Local: The extension is extension connected to located on the same the port.
2.3.2 PBX Configuration—[2-2] Extension—Phone 2.3.2 PBX Configuration—[2-2] Extension—Phone Description Settings can be made for each telephone. Click the "Edit" button located on the side of an item to enable editing of the setting values. Screen / Tab Setting item Description Input Type Note 2.Phone...
2.3.3 PBX Configuration—[2-3] Extension—Flexible Buttons Screen / Tab Setting item Description Input Type Note Voice Mail-Send Specifies the notification Radio When selecting Email when to a subscriber when a "Enable", send Voice Message is left new message is recorded Mail recording notice in his or her mailbox by e- email to "Contact-...
2.3.4 PBX Configuration—[2-4] Extension—Extension Group Screen / Tab Setting item Description Input Type Note Flexible Buttons- Specifies the name of TextLCDHD Key Name each flexible button. DSS Buttons Indicates the location (Require DSS number of flexible buttons. Console)-Key Location DSS Buttons Specifies the feature to be Select (Require DSS...
2.3.5 PBX Configuration—[2-5] Extension—Doorphone Screen / Tab Setting item Description Input Type Note FWD-FWD No Selects the length of time Select It is possible to set by Answer Time that an incoming call rings each time service. at the extension before the •...
2.4 PBX Configuration—[3] Trunk 2.4 PBX Configuration—[3] Trunk 2.4.1 PBX Configuration—[3-1] Trunk—Port Description Settings can be made for each trunk port. Click the "Edit" button located next to the trunk number to enable editing of the setting values. Screen / Tab Setting item Description Input Type...
Page 39
2.4.1 PBX Configuration—[3-1] Trunk—Port Screen / Tab Setting item Description Input Type Note 1.Port-Analog - Pulse Speed Selects the speed at which Select Dialing pulse dials are sent to the analog trunk. DTMF Width Selects the length of the DTMF Select tone sent to the analog trunk.
2.4.2 PBX Configuration—[3-2] Trunk—DIL Screen / Tab Setting item Description Input Type Note 1.Port-Analog - Mode Enables the PBX to Radio Collect Call automatically reject collect Reject (for calls. This setting is only for Brazil) users in Brazil. Wait Time Selects the length of time that Select the PBX waits before sending...
2.4.4 PBX Configuration—[3-4] Trunk—Caller ID Modify & Block Screen / Tab Setting item Description Input Type Note DDI Table - DDI Specifies the DDI number. Dial1 Number DDI Table - Name Specifies the name for the Text LCD DDI number. DDI Table - Specifies the DDI Select...
2.4.5 PBX Configuration—[3-5] Trunk—DISA Screen / Tab Setting item Description Input Type Note SIP Trunk Enables Caller ID Modify Radio by Length of Digits for the SIP trunk. 2.4.5 PBX Configuration—[3-5] Trunk—DISA Description DISA settings can be programmed for the trunk. Screen / Tab Setting item Description...
Page 43
2.4.5 PBX Configuration—[3-5] Trunk—DISA Screen / Tab Setting item Description Input Type Note 1 Digit AA Specifies the destination Select Destination for each DISA Automated (Extension Attendant (AA) number. Number) - Dial8 1 Digit AA Specifies the destination Select Destination for each DISA Automated (Extension Attendant (AA) number.
2.4.6 PBX Configuration—[3-6] Trunk—Analog CO Property Screen / Tab Setting item Description Input Type Note DISA Cyclic Tone - Selects the tone-on Select This setting can be Tone on Maximum maximum time. selected if DISA Cyclic Time (ms) Tone is selected for the Option.
2.4.7 PBX Configuration—[3-7] Trunk—SIP Trunk Property Screen / Tab Setting item Description Input Type Note Pulse / DTMF Dial Specifies the length of the Select - Pulse Inter-digit pulse inter-digit pause. Pause Low Speed Pulse Specifies the % break for Select Dial - Pulse % a low speed pulse dial.
Page 46
2.4.7 PBX Configuration—[3-7] Trunk—SIP Trunk Property Screen / Tab Setting item Description Input Type Note RTCP Sending Selects the RTCP sending Select Interval (s) interval. 7.SIP Trunk Provider Name (20 Specifies the name of the Text5 Property- characters) SIP provider. SIP Server Name Specifies the domain Text5...
Page 47
2.4.7 PBX Configuration—[3-7] Trunk—SIP Trunk Property Screen / Tab Setting item Description Input Type Note Voice - IP Codec Specifies the priority of the Radio Priority 3rd codecs to be used. None is only available for 2nd and 3rd priorities. Voice - Packet Specifies the time interval Select...
Page 48
2.4.7 PBX Configuration—[3-7] Trunk—SIP Trunk Property Screen / Tab Setting item Description Input Type Note DSP - PCM Side - Selects the echo canceller Select Echo Canceller window size of the PCM Window Size side. Option - ITSP Port Enables the ITSP port Radio Check check feature.
2.5.2 PBX Configuration—[4-2] TRS/ARS—ARS Carrier 2.5.2 PBX Configuration—[4-2] TRS/ARS—ARS Carrier Description The carrier settings for ARS can be programmed. Screen / Tab Setting item Description Input Type Note 2.ARS Carrier Name Specifies the carrier Text5 Carrier name. Dial Modification - Specifies the number of Select Remove...
2.5.5 PBX Configuration—[4-5] TRS/ARS—Options 2.5.5 PBX Configuration—[4-5] TRS/ARS—Options Description The other settings for TRS/ARS can be programmed. Screen / Tab Setting item Description Input Type Note 5.Options TRS Check for Dial Enables a TRS/Barring Radio check for the user-dialed "*" and "#". Dial Digits Specifies a limit to be Select...
2.6 PBX Configuration—[5] System Speed Dialing 2.6 PBX Configuration—[5] System Speed Dialing Description The System Speed Dialing settings can be programmed. Screen / Tab Setting item Description Input Type 1.System Name (20 Specifies a name for the TextLCDHD Speed characters) System Speed Dialing Dialing number.
2.7 PBX Configuration—[6] Conference 2.7 PBX Configuration—[6] Conference Description The conference call settings can be programmed. Screen / Tab Setting item Description Input Type Note 1.Meet Me Conference1 - Assigns a floating Text Conference Room extension number for Numeric Extension Number conference call room 1.
2.8 PBX Configuration—[7] Voice Mail 2.8 PBX Configuration—[7] Voice Mail Description The voice mail settings can be programmed. Screen / Tab Setting item Description Input Type Note 1.Voice Mail Voice Mail Specifies the extension Text Extension Number number for voice mail. Numeric Prompt Language Selects the prompt...
3.1 Network Configuration 3.1 Network Configuration You can view and set the basic LAN/WAN settings. Screen / Tab Setting item Description Input Type Note LAN1 IP Address Indicates the IP address of Information the mother board (reference only). Subnet Mask Indicates the network mask address of the mother board (reference...
3.2 Network Configuration—[3] WAN 3.2 Network Configuration—[3] WAN 3.2.1 Network Configuration—[3-1] WAN—WAN Setting Screen / Tab Setting item Description Input Type Note 1.WAN WAN Setting - Provides information of Setting WAN Name WAN Name configured. WAN Setting - Provides information of WAN Channel layer-2 WAN channel configured.
Page 58
3.2.1 Network Configuration—[3-1] WAN—WAN Setting Screen / Tab Setting item Description Input Type Note Please retype your To enter the same Text Router This feature is password password again to Pwd2 available when PPPoE reconfirm. is selected in WAN Type. Service Name PPP Service Name Text...
Page 59
3.2.1 Network Configuration—[3-1] WAN—WAN Setting Screen / Tab Setting item Description Input Type Note Secondary DNS Specifies the secondary IP Address This feature is Server DNS server for the WAN. available when ON is selected in Static DNS. If the address of the secondary DNS server is received from PPPoE sever before...
3.2.2 Network Configuration—[3-2] WAN—WAN Status 3.2.2 Network Configuration—[3-2] WAN—WAN Status The WAN status can be confirmed. Screen / Tab Setting item Description Input Type Note 2.WAN WAN Number Status WAN Channel For the currently configured WAN interface, this gives the layer-2 WAN channel information.
Page 61
3.2.2 Network Configuration—[3-2] WAN—WAN Status Screen / Tab Setting item Description Input Type Note Displays the IP address in Unconfigured: use. – IP address is not received when Connection Type is DHCP Client. – IP address is not received when Connection Type is PPPoE.
3.2.3 Network Configuration—[3-4] WAN—DDNS 3.2.3 Network Configuration—[3-4] WAN—DDNS The DDNS settings for the WAN can be programmed. In order to reflect the menu setup, you must set "Enable DDNS Support" to Enable. Screen / Tab Setting item Description Input Type Note 4.DDNS Enable DDNS...
3.3 Network Configuration—[4] LAN 3.3 Network Configuration—[4] LAN 3.3.1 Network Configuration—[4-2] LAN—LAN Settings The LAN settings can be programmed. Screen / Tab Setting item Description Input Type Note 2.LAN IP Address Used to enter the LAN IP Address Settings interface IP Address of the PBX.
3.3.2 Network Configuration—[4-3] LAN—DHCP Client List Screen / Tab Setting item Description Input Type Note ENABLE To enable this static IP Check reservation entry. Modify Button Clicking this button allows you to modify the IP reservation settings. 2.LAN Modify MAC IP Specifies the host name.
3.4 Network Configuration—[5] Route 3.4 Network Configuration—[5] Route 3.4.1 Network Configuration—[5-1] Route—Static Routing The static routing settings can be programmed. Screen / Tab Setting item Description Input Type Note 1.Static Destination IP To enter the destination IP IP Address Routing Address of a routing entry.
3.5 Network Configuration—[6] Wireless 3.5 Network Configuration—[6] Wireless 3.5.1 Network Configuration—[6-1] Wireless—Radio Settings The wireless radio settings can be programmed. Screen / Tab Setting item Description Input Type Note 1.Radio Common Settings - Enable / Disable of WLAN Check Settings - WLAN Radio Radio in the PBX.
3.5.3 Network Configuration—[6-3] Wireless—Security Settings Screen / Tab Setting item Description Input Type Note Modify Button Clicking this button allows you to modify a WLAN AP configuration. 2.Main AP SSID Service Set Identifier of Text Router Settings - SSID WLAN AP AP Name AP Name - Unique Text...
Page 69
3.5.3 Network Configuration—[6-3] Wireless—Security Settings Screen / Tab Setting item Description Input Type Note WEP Key Settings Selects the key index. Select This feature is - Key Index available when WEP is selected in Encryption Type. WEP Key Settings Selects the encryption Select This feature is - Encryption Level...
3.5.4 Network Configuration—[6-5] Wireless—Wireless LAN Setup Settings Screen / Tab Setting item Description Input Type Note Personal Settings - Specifies the passphrase Text ASCII This feature is Passphrase (8-63 characters). available when Personal is selected in Authentication Type. Personal Settings - Switches either display or This feature is Display/Hide...
3.5.5 Network Configuration—[6-6] Wireless—MAC Filter Screen / Tab Setting item Description Input Type Note Push Button Click "start PBC", then Configuration start PBC on the device (PBC) Method you want to connect to the router within two minutes. 3.5.5 Network Configuration—[6-6] Wireless—MAC Filter The wireless MAC filter settings can be programmed.
3.6 Network Configuration—[7] Firewall 3.6 Network Configuration—[7] Firewall 3.6.1 Network Configuration—[7-1] Firewall—Firewall Setting Description The firewall settings can be programmed. Screen / Tab Setting item Description Input Type Note 1.Firewall Firewall Setting It allows for the enabling Radio Setting or disabling of the firewall in the PBX's.
Page 73
3.6.2 Network Configuration—[7-2] Firewall—Packet Filtering Screen / Tab Setting item Description Input Type Note Enable To enable/disable the Check particular packet filtering rule. Modify Button Clicking this button allows you to modify a packet filtering rule. 2.Packet Protocol To select the protocol. The Select Filtering - options available are TCP,...
Page 74
3.6.2 Network Configuration—[7-2] Firewall—Packet Filtering Screen / Tab Setting item Description Input Type Note Ingress Interface To specify the input Select interface of the packet from dropdown options. (e.g. WAN1). Egress Interface To specify the output Select interface of the packet from dropdown options.
3.6.3 Network Configuration—[7-3] Firewall—Application Server Settings Screen / Tab Setting item Description Input Type Note Destination To specify a netmask for Subnet This feature is Netmask the destination IP address. Mask4 available when SUBNET is selected in the Destination IP Type.
3.7 Network Configuration—[8] NAT 3.7 Network Configuration—[8] NAT 3.7.1 Network Configuration—[8-1] NAT—NAT Settings Description The NAT settings can be programmed. Screen / Tab Setting item Description Input Type Note 1.NAT NAT Settings Used to Enable or Disable Radio Settings the Network Address Translation feature.
3.7.3 Network Configuration—[8-3] NAT—DMZ Screen / Tab Setting item Description Input Type Note Modify Button Clicking this button allows you to modify a virtual server configuration. 2.Virtual Application Name - Custom application Text Up to 40 characters. Server - Custom application Configure Virtual Server...
3.8 Network Configuration—[10] Port Status 3.8 Network Configuration—[10] Port Status Description This menu displays the link status for each port. Screen / Tab Setting item Description Input Type Note 1.Port Status Physical Link Displays the WAN Port 1 Status - WAN1 physical link status, up or down.
4.1 Maintenance 4.1 Maintenance Description Indicates various version informations and system informations. Screen / Tab Setting item Description Input Type Note Maintenance Main Unit Version Indicates a main unit —Version software version of Information KX-HTS series. Bootloader Version Indicates a bootloader version of KX-HTS series.
4.2 Maintenance—[1] Management 4.2 Maintenance—[1] Management Description Opens or closes the port for the NW external (WAN) connection through Web Maintenance Console Implement a registration for login level and a user account. 4.2.1 Maintenance—[1-1] Management—Web Programming Screen / Tab Setting item Description Input Type Note...
4.3 Maintenance—[2] System Control 4.3 Maintenance—[2] System Control Description This section serves as reference operating instructions for the System Control menu of the Maintenance screen when programming using Web Maintenance Console. 4.3.1 Maintenance—[2-1] System Control—Firmware Transfer to Screen / Tab Setting item Description Input Type...
4.3.2 Maintenance—[2-2] System Control—Firmware Update 4.3.2 Maintenance—[2-2] System Control—Firmware Update Screen / Tab Setting item Description Input Type Note 2.Firmware Update File- Indicates a Program type. Update Program Update File-File Indicates a File name. Name Update File- Indicates a Firmware Version version.
4.3.4 Maintenance—[2-4] System Control—System Reset 4.3.4 Maintenance—[2-4] System Control—System Reset Screen / Tab Setting item Description Input Type Note 4.System System Reset Reset button Reset When programming changes or other changes to PBX settings require a system reset, this command allows a reset to be performed remotely from Web Maintenance Console.
4.4.3 Maintenance—[3-3] Utility—Email Notification 4.4.3 Maintenance—[3-3] Utility—Email Notification Screen / Tab Setting item Description Input Type Note 3.Email System Alarm- For Filtering Setting, Check Notification- Filtering Setting- select the check boxes to Email Major specify whether to receive Notification e-mails when there is a Major alarm, a Minor alarm, or both.
Page 87
4.4.3 Maintenance—[3-3] Utility—Email Notification Screen / Tab Setting item Description Input Type Note SMTP Server for Specifies the host name of Text Router Relay-Name the SMTP server to be used to send e-mails. SMTP Server for Specifies the port number Unsigned Relay-SMTP of the SMTP server to be...
Page 92
Web Site: http://www.panasonic.com/ Copyright: This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System Networks Co., Ltd.